Electronics
Tuesday, 16 September 2008
- F2008-05-011
- R&D of Non-Contact Rapid Charging Inductive Power Supply System for Electric Vehicles
- Mr. Takeshi Sato, Showa Aircraft Industry Co., Ltd., Japan
- F2008-05-012
- Towards Automotive Security
- Prof. Christoph Ruland, University of Siegen, Germany
- F2008-05-017
- Systemintergation of Electronics in Decentraliced Actors of the Powertrain System
- Mr. Johann Maier, AB Mikroelektronik, Austria
- F2008-05-019
- A Cohesive Design Based Management of Embedded Systems Requirements
- Mr Eric Larronde-Larretche, Geensys, France
- F2008-05-023
- Rollout of AUTOSAR BSW in Continental Business Unit Engine Systems
- Mr. Benno Larisch, VDO Automotive AG, Ein Unternehmen des Continental-Konzerns, Germany
- F2008-05-026
- Safety Standards in Transportation Systems - Effort, Benefit and Challenges
- Mr. Tobias Ständer, TU Braunschweig, Germany
- F2008-05-028
- Numerical Computation of the Transient Temperatureof the Electronic Equipment Enclosed in a Passenger Car
- Mrs. Florence Michel, Daimler AG, Germany
- F2008-05-034
- Wakeup and Startup of FlexRay
- Prof. Konrad Reif, Berufsakademie Ravensburg, Germany
- F2008-05-035
- Electromagnetic Compatibility Design for Powertrain Control Module (PCM)
- Dr. Yuming Wang, Beijing Institute of Technology, China
- F2008-05-054
- Drivewise - a Vehicle with Steer-by-Wire and Torque-VectoringTM
- Dr. Peter Miller, Ricardo, United Kingdom
- F2008-05-059
- Cooperation between European and Japanese Standard Setting Consortia in Automotive High-Speed Safety Bus System: The Analysis between FRC and JasPar
- Dr. Akio Tokuda, Ritsumeikan University/ RWTH Aachen, Germany
- F2008-05-062
- Positive Output Buck-Boost Converter
- Dr. Ronald Crews, National Semiconductor, United States
- F2008-05-065
- Mining Software Repository for Extracting Software Product Line Variability
- Mr. Kentaro Yoshimura, Hitachi, Ltd., Japan
- F2008-05-066
- A Method for Improving Reliability of Gateway by Using OSEK/VDX and Duplication Scheme
- Mr. Jin Ho Kim, Sungkyunkwan University, Korea
- F2008-05-071
- Development of a Displacement Sensor for Intelligent Suspension
- Mr. Donghun Lee, INJE UNIVERSITY, Korea
- F2008-05-104
- Modeling of Piezoelectric Sensors and Actuators
- Mrs. Camila Gianini Gonsalez, UNESP - Universidade Estadual Paulista 'Júlio de Mesquita Filho', Brazil
- F2008-05-106
- Hybrid Electrical Air-Cushion Tracked Vehicle for Swamp Peat in Malaysia
- Dr. Ataur Rahman, International Islamic University, Malaysia
- F2008-05-112
- Traceability - Orientation in the Labyrinth of Links
- Mr. Michael Gerdom, Method Park Software AG, Germany
- F2008-05-114
- A Fault Tolerance Architecture for Drive-by-Wire Automotive System
- Dr. Max Mauro Santos, STR - UnilesteMG, Brazil